KINGSTON

Kingston Value RAM 4GB 1600MHz PC3-12800 DDR3 Non-ECC CL11 DIMM SR x8 Desktop Memory (KVR16N11S8/4)

19.00 JD

Brands

210

In stock

SKU: 2800070 Categories: , Tag:
Description

Description

Kingston Value RAM 4GB 1600MHz PC3-12800 DDR3
Non-ECC CL11 DIMM SR x8 Desktop Memory (KVR16N11S8/4)

4GB module of 1600MHz DDR3 Desktop RAM

DESCRIPTION
This document describes ValueRAM’s 512M x 64-bit (4GB)
DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory
module, based on eight 512M x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR3-1600
timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
contact fingers

FEATURES
• JEDEC standard 1.5V Power Supply
• VDDQ = 1.5V
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 0.740” (18.75mm) or 1.180” (30.00mm)

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Kingston Value RAM 4GB 1600MHz PC3-12800 DDR3 Non-ECC CL11 DIMM SR x8 Desktop Memory (KVR16N11S8/4)”

Your email address will not be published. Required fields are marked *