Kingston 4GB / 1600MHz DDR3 Notebook [ KVR16S11S8/4 ]

Kingston 4GB/1600MHz DDR3 Notebook

Kingston 4GB 1600MHz DDR3/Notebook  KVR16S11S8/4

One 4GB module of 1600MHz DDR3 Notebook Memory

DESCRIPTION

ValueRAM’s KVR16S11S8/4 is a 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 204-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

JEDEC 1.5V Power Supply

VDDQ = 1.5V

800MHz fCK for 1600Mb/sec/pin

8 independent internal banks

Programmable CAS latency: 11, 10, 9, 8, 7, 6, 5

Programmable Additive Latency: 0, CL – 2, or CL – 1 clock

8-bit pre-fetch

Burst Length: 8 (interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)

Bi-directional Differential Data Strobe

Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)

On Die Termination using ODT pin

Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº

Asynchronous Reset

PCB: Height 1.180” (30.00mm), double sided component

SPECIFICATIONS

for more information about Kingston 4GB 1600MHz DDR3/Notebook visit offcial website of Kingston .

Click Here

for more kingston products

Click Here