Kingston Value RAM 4GB 1600MHz PC3-12800 DDR3
Non-ECC CL11 DIMM SR x8 Desktop Memory
Kingston 4GB 1600MHz/Desktop [ KVR16N11S8/4 ]
4GB module of 1600MHz DDR3 Desktop RAM
DESCRIPTION
This document describes ValueRAM’s 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers
FEATURES
JEDEC standard 1.5V Power Supply
VDDQ = 1.5V
800MHz fCK for 1600Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB : Height 0.740” (18.75mm) or 1.180” (30.00mm)
for more information about Kingston 4GB 1600MHz/Desktop visit official website of Kingston .
for more Kingston Products visit Us at Our Website :
Reviews
There are no reviews yet.