Kingston ValueRam 16GB 3200MT/s DDR4 Memory RAM KVR32N22D6/16
More about Kingston 16GB 3200MT/s KVR32N22D6/16
DESCRIPTION SPECIFICATIONS
16GB 2Rx8 2G x 64-Bit PC4-3200
CL22 288-Pin DIMM
Continued >>
FEATURES
This document describes ValueRAM’s KVR32N22D8/16 is a 2G x
64-bit (16GB) DDR4 – 3200 CL22 SDRAM (Synchronous DRAM), 2Rx8,
memory module, based on sixteen 1G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-3200 timing of
22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers. 
The electrical and mechanical specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
22 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
94 V – 0
0o C to +85o C
-55o C to +100o C
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free
Memory Module Specific cations
Reviews
There are no reviews yet.