Kingston 4GB (DDR4-2666) PC4-2666 CL19 288-Pin UDIMM Desktop [KVR26N19S6/4]

Description

Kingston 4GB (DDR4-2666) PC4-2666 CL19 288-Pin UDIMM Desktop [KVR26N19S6/4]

DESCRIPTION

This document describes ValueRAM’s KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

SPECIFICATIONS

FEATURES

# Power Supply:

# VDD = 1.2V Typical

# VDDQ = 1.2V Typical

# VPP = 2.5V Typical

# VDDSPD = 2.2V to 3.6V

# Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

# Low-power auto self refresh (LPASR)

# Data bus inversion (DBI) for data bus

# On-die VREFDQ generation and calibration

# Single-rank

# On-board I2 serial presence-detect (SPD) EEPROM

# 8 internal banks; 2 groups of 4 banks each

# Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

# Selectable BC4 or BL8 on-the-fly (OTF)

# Fly-by topology

# Terminated control command and address bus

# PCB: Height 1.23” (31.25mm)

# RoHS Compliant and Halogen-Free

MODULE DIMENSIONS