KINGSTON 2GB/1600MHz DDR3 Desktop [ KVR16N11S6 ]

Kingston 2GB 1600 DDR3/Desktop

Kingston 2GB 1600 DDR3/Desktop [ KVR16N11S6 ]

DESCRIPTION

This document describes ValueRAM’s 256M x 64-bit (2GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 256M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers.

FEATURES

JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

VDDQ = 1.5V (1.425V ~ 1.575V)

800MHz fCK for 1600Mb/sec/pin

8 independent internal bank

Programmable CAS Latency: 11, 10, 9, 8, 7, 6

Programmable Additive Latency: 0, CL – 2, or CL – 1 clock

8-bit pre-fetch

Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

Bi-directional Differential Data Strobe

Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)

On Die Termination using ODT pin

Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C

Asynchronous Reset

PCB : Height 1.180” (30.00mm), single sided component

for more information about This Product visit official  website of Kingston .

Click Here

for more Kingston products

Click Here