KINGSTON 16GB / 2666 MHz DDR4 PC4-CL19 260-Pin SODIMM Notebook RAM [KVR26S19D8/16] (1.2V)

KINGSTON 16GB / 2666 MHz DDR4 PC4-CL19 260-Pin SODIMM Notebook RAM [KVR26S19D8/16] (1.2V)

DESCRIPTION

This document describes ValueRAM’s KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

# Power Supply: VDD = 1.2V Typical

# VDDQ = 1.2V Typical

# VPP = 2.5V Typical

# VDDSPD = 2.2V to 3.6V

# Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

# Low-power auto self refresh (LPASR)

# Data bus inversion (DBI) for data bus

# On-die VREFDQ generation and calibration

# Dual-rank

# On-board I2 serial presence-detect (SPD) EEPROM

# 16 internal banks; 4 groups of 4 banks each

# Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

# Selectable BC4 or BL8 on-the-fly (OTF)

# Fly-by topology

# Terminated control command and address bus

# PCB: Height 1.18” (30.00mm)

# RoHS Compliant and Halogen-Free

for more info. Click Here

for more Kingston Product Click Here