KINGSTON HyperX 16GB / 2666 MHz DDR4 64-Bit CL16 288-Pin DIMM Desktop RAM [HX426C16FB/16 ] (1.2V)

59.00 JOD
Product Code: 2800119
Availability:
Out Of Stock

Description


KINGSTON HyperX 16GB / 2666 MHz DDR4 64-Bit CL16 288-Pin DIMM Desktop RAM [HX426C16FB/16 ] (1.2V)


​DESCRIPTION

HyperX HX426C16FB/16 is a 2G x 64-bit (16GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

 

SPECIFICATIONS

FEATURES

Power Supply: VDD = 1.2V Typical

#  VDDQ = 1.2V Typical

#  VPP = 2.5V Typical

#  VDDSPD = 2.2V to 3.6V

#  Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

#  Low-power auto self refresh (LPASR)

#  Data bus inversion (DBI) for data bus

#  On-die VREFDQ generation and calibration

#  Dual-rank

#  On-board I2 serial presence-detect (SPD) EEPROM

#  16 internal banks; 4 groups of 4 banks each

#  Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

#  Selectable BC4 or BL8 on-the-fly (OTF)

#  Fly-by topology

#  Terminated control command and address bus

#  Height 1.340” (34.04mm), w/heatsink

 

For more details please visit the link below:

https://www.kingston.com/dataSheets/HX426C16FB_16.pdf

Specification

Memory
Capacity 16GB
SPEED 2666 MHz
TYPE DDR4 // PC4
VOLTAGE 1.2V
Warranty 3-Years

Reviews


There are no reviews for this product
Login For Write a review